This article will tell you everything that you need to know to how to use the TecTecTec VPRO500 Golf Rangefinder. It works the same as there other rangefinders, including the TecTecTec VPRO500S, VPRO DLXS and ULT X. The only difference between these rangefinders are the extra features found in some of the rangefinders. For example, the TecTecTec VPRO500S, VPRO DLXS and ULT X can compensate distances for slope or elevation changes on the course while the TecTecTec VPRO500 cannot.
If you want to know more about the differences between the TecTecTec VPRO500S, VPRO DLXS and ULT X, then please look at this article: https://golfgpsauthority.com/tectectec-vpro500-vs-vpro500s-vs-vpro-dlx-vs-vpro-dlxs-vs-ult-x-vs-vpro-dlx-1k-vs-prowild-review-difference-compare/.
The best TecTecTec Rangefinder is the ULT X because it has slope compensation and the longest range of any TecTecTec Rangefinder. If you want to read a review about the TecTecTec ULT X, then please read this article tectectec ult-x review
The first thing to do is to remove the battery cover near the back of the device and insert the CR2 3V lithium battery into the empty compartment with the positive side facing out.
You can turn the eyepiece to the left and right, while looking through it, until you get a clear view of the targets on the course.
There are two buttons on top the device: Power and Mode. The button closest to the eyepiece is the power button. You can turn on this rangefinder by pressing the power button once. You don’t have to hold down the button for more than 1 second.
This laser rangefinder can operate in three different modes. You can access each mode by pressing the mode button in order to cycle through the different modes until you reach the desired mode.
If you want to read more about other great low budget golf laser rangefinders from companies such as Callaway, Precision Pro, Nikon and Bozily, then please read this article https://golfgpsauthority.com/best-budget-golf-rangefinders-with-slope/.
This device comes with two units of measurement. You can press and hold the mode button for three seconds to alternate between yards andmeters.
to change the unit of measurement. This unit will come on in the last mode. It was in when powered off a normal mode.
Table of Contents
How do you take distance measurements with the TecTecTec VPRO500 laser rangefinder?
Normal mode is great for shots that are fairly close or straightforward. You have to aim the front end of the device at an object such as a tree, flagstick or sand bunker. Then press the power button and hold it down until a stable distance reading appears on the LCD screen. In order to find the distance to another object, simply aim the laser at it and then press and hold down the power button.
Scan mode
Scan mode is great for examining terrain and planning difficult shots to the hole when the flagstick is surrounded by background objects or when conditions are less than ideal. In order to use the scan mode, press and hold the power button as you pan over the terrain and pause when the crosshairs are over an element that you want to know the distance to
Pinsensor mode
Pinsensor mode is your best bet, whether you’ll be using the rangefinder for practice or competition improvement or refinement. In order to switch to pinsensor mode, press the mode button until you see a flag icon. Once you see the flag icon appear, just aim past the pin and press and hold the power button as you pan over it. You can then release the button after the crosshairs have passed over the target and a distance reading appears.
